category

Zund & Fotoba High Tech Engineering

ZUND G3 Plotter

Flatbed Cutter ZÜND G3 enables precise cutting of previously laminated sign faces. Thanks to the optical camera detecting and following crop marks, cutting is easy and fully automated. Cutter is equipped with a vacuum table, conveyor belt and roll-off unit, enabling automatic loading of the material from the roll. Cutting is done by the multifunctional head with active blades. All tools can be calibrated and position fully regulated. Maximum blade pressure is 20 kg (44 lb). All types of reflective sheeting can be cut completely through or “kiss cut“. Cutter workstation is run by dedicated ZCC Software and advanced controller with electronic control panel. It has a visual, intuitive user interface. Material profiles and cutter configuration eliminates trial and error and reduces operator input.

Technical Specifications

Maximum working area 1330 x 1600 mm (52.4 in x 63 in)
Maximum speed 1.4 m/s
Maximum substrate thickness 50 mm (2 in)
Position accuracy ±0.1 mm/m
Net weight 670 kg (1477 lb)
Width (incl. workstation) 2355 mm (92.7 in)
Length 2512 mm (99 in)
Environmental ranges Operating temperature: 10 to 35°C (50 to 95°F)
Operating humidity: 10 to 80% RH (non-condensing)
Electrical requirements 3+N/PE, 400 V, 50/60 Hz, 32 A

Flatbed Cutter ZÜND G3 can be upgraded with the Routing Module. Within this configuration it becomes part of System DRS 64 PRO +, giving the traffic sign manufacturer additional abilities. In addition to cutting printed sign faces, it can also mill sign blanks from a variety of different materials such as aluminium, composite, plastic panels, to name a few.

The Routing Module includes: active air-cooled, high-frequency spindle with 6 mm or ¼-inch collet, powerful chip removal with electronically-controlled dust collector and (optional) lubrication system. This Cutter configuration has material surface compensation for relative depth control.