Different laminating and applicating needs

RollsRoller laminator 600 Traffic

ROLLSROLLER TRAFFIC is designed for road sign production with high volumes of guide signs. It has a special profile bed adjustable to fit almost any extruded guide sign panels. Traffic is most often used in combination with a Entry, Regular or Premium model to create a complete workflow.

ROLLSROLLER Traffic Flatbed Applicator; Pneumatically controlled roller which is automatically adjusted for substrates up to 60 mm (2 2/5in); Adjustable aluminum profile bed (special design for mounting onto high volume of Guide sign panels); Roll holder on glide beam for pre-masking tape and laminate; Roll holder on bed end for printed or cut film; Stop static kit (cord and magnet) to dissipate static electricity; Casters (lockable); Machine feet; Owner’s manual.

Special design for mounting onto high volume of Guide sign panels, bend panels and extruded panels.

Up to 1,4 meter (55in.) wide; Up to 5,7 meter (224in.) long

Antistatic system; Long life compressor; Flatbed top incl. cutting mat

Bed length 6 000 mm / 19ft. 2in.
Bed width 1 450 mm / 4ft. 9in.
Length of working area 5 700 mm / 18ft. 8in.
Width of working area/roller width 1 400 mm / 55in.
Work height flatbed 905 mm / 2ft. 12in.
Max. thickness of substrate 60 mm / 2 2/5in.
Bed surface Adjustable aluminum profiles
Light table (LED) Not available
Roll holder on Glide beam yes
Roll holder on one short side yes
Stop static kit (cord and magnet) yes



  • ROLLSROLLER Long life compressor**
  • Additional roll holder on on bed end
  • Extra Glide beam with roller
  • Antistatic System
  • Flatbed top + cutting mat
    2000 x 1 450 mm / 6ft. 7in. X 4ft. 9in.**
    3 000 x 1 450 mm / 9ft. 10in. X 4ft. 9in.***

* Oil free, 57db, 3 years warranty